Desktop & Rackmount Fast Ethernet Power over Ethernet (PoE) Switches



Designed for use with Power over Ethernet (PoE) devices, the SGD8P switch provides up to 15.4W of power to PoE compatible devices connected to the switch’s PoE ports. The Switch allows these devices to draw power from the switch and remove the need for a power adapter. Some devices that may have support for 802.3af are Wireless Access Points, IP Phones and IP Cameras. The Switch’s ports automatically negotiate between 10BASE-T, 100BASE-TX and 1000BASE-TX network speeds, as well as between full and half duplex modes, so port connections become hassle free. The ports also support Auto MDIX, allowing the automatic detection of a straight through or cross-over cable, this feature reduces support problems commonly caused by incorrect cable usage.

Additional information

Switching Capacity

16 Gbps

MAC Address Table Size


Buffer Memory

96 KB

Networking Standards

IEEE802.3i 10 BASE-T; IEEE802.3i 100 BASE-TX, IEEE802.3i 1000 BASE-TX, IEEE802.3x flow control; IEEE802.3af

RJ-45 1000Base-T

8 x 10/100/1000Mbps PoE Ethernet Ports

PoE Features

Up to 15.4W per PoE port (IEEE802.3af) PoE pin pairs 1/2 and 3/6

Forwarding Mode

Store and Forward

Flow Control

Half-duplex back pressure and IEEE802.3X full-duplex flow control

LED Indicator

System: Power,PoE max. power; Per port: Link, speed, PoE active, PoE error

Minimum Cable Requirement

UTP cat5 or higher



Power Supply

External cUL 48V 1.25A


Fanless design

Power Consumption

Total power consumption: 120W Total PoE power budget: 120W

Operating Temperature Range

32° to 104° F (0° to 40° C)

Storage Temperature Range

14° to 158° F (-10° to 70° C)

Operating Humidity Range

20%-85%, Non-condensing

Width x Depth x Height

218 x 105 x 28 mm; 8 9/16 x 4 1/8 x 1 7/64 inch


0.66lbs (300g)

Case Material



Desk or Wall Mount


3 Years


Free technical support (phone/email)


SGD8P Spec Sheet

SGD8P Manual 


There are no reviews yet.

Be the first to review “SGD8P”

Your email address will not be published. Required fields are marked *