1 GB Controller, 16-128 APs Supported Base License is 16 APs


The WS6002 is a access controller  designed for small and medium wireless networks and large enterprise branches. It can combine with the WAP33DC and the WAP38DC to form a centrally managed wireless LAN (WLAN) solution.

The WS6002 supports two 10/100/1000Base-T network ports, and can manage up to 128 wireless APs. The device provides strong WLAN access control through systems such as precise user control and management, complete RF management and security mechanism, seamless roaming, and authentication based on existing networks. Underpinned by a smart cluster management technology, the solution automatically adjusts AP power and channels by monitoring and controlling the RF environment of each AP in real time, and balances loads based on the number of users or traffic to minimize interference to wireless signals and stabilize wireless network loads.

The WS6002 is designed with full IPv6 compatibility. The device supports a broad range of static routing protocols including RIP, OSPF and PIM, as well as dynamic routing protocols such as IPv6 RIPng, OSPFv3 and PIM6.
The WS6002 works with both the WAP33DC and the WAP38DC stand alone access points. The WS6002 can support 16 access points by defualt, and can be upgrade to support a maximum of 128 access points.

Additional information

Network Connection

2 X 10/100/1000Base-T

Management port

One console port (RJ-45)

Power supply

AC 100 V to 240 V, 50 Hz to 60 Hz

Maximum power consumption


Working temperature

0˚ to 50° –40° to 70°


328.2 mm x 170 mm x 42.2 mm

Range of Managed APs

16 base to 128 max. depending on license.

Cluster controller max


Max # of wireless users




ARP table


L2 protocols

IEEE802.3{u,ab} VLAN, COS, Port control, IGMP Snooping, MLD Snooping GVRP, PVLAN

L3 protocols

Static Routing,RIPv1/v2, OSPF, VRRP, IGMP v1/v2/v3, ARP, PIM-SM, PIM-DM, PIM-SSM

Wireless protocols


CAPWAP protocol

Supports AP and AC discovery and upgrading


1 1 fast backup, N 1 backup, N N backup ,Portal 1 1 backup.

RF Management Features

Blind area detection and repair, RF interference detection and avoidance, Terminal-based airtime fairness scheduling, User access control, Automatic aging of traffic-free users, Prohibiting the access of clients with weak signals, Remote probe analysis.

Security Features

64/128 WEP, dynamic WEP, TKIP, CCMP, and SMS encryption, WAPI/LDAP/MAC Authentication, Portal Authentication, White and blacklist control, User isolation, Schedule, control of free resources, AP authentication,WIDS, WIPS.


IPv4 and IPv6 network support, multicasting, fast roaming between APs and controllers.


Mapping of different SSIDs/VLANs to different QoS policies, access control of MAC, IPv4, and IPv6 data packets, load balancing based on number of users,traffic, frequency bands, CAC based on the number of users, bandwidth limit based on APs, SSIDs, terminals, data streams, power saving mode, multicast-to-unicast mechanism, automatic emergency mechanism of APs, intelligent identification of terminals, 802.11e (WMM); and 4-level priority queues.


Web management, CLI, Telnet, SSH support, SNMP v1/v2 /v3, Local logs, Syslog, and log file export, alarm, fault detection, statistics, dual-image (dual-OS) backup, hardware watchdog.

Supported APs



5 Years


WS6002 Spec Sheet 


There are no reviews yet.

Be the first to review “WS6002”

Your email address will not be published. Required fields are marked *