802.11ac Wave 2 Outdoor AP with Internal Antenna



The WAP44IO is a series of next generation 802.11ac Wave 2 based high-performance gigabit outdoor access points, launched by Amer Networks. The WAP44IO uses GE ports as its uplink ports for network access, which breaks through the limitations of FE ports and enables wireless multimedia applications to run at full capacity. Next-generation 802.11ac based high-performance gigabit outdoor wireless access Specifications The WAP44IO operates in a 2.4 GHz or 5 GHz band and employs technologies such as multiple-input multiple-output (MIMO) and orthogonal frequency division multiplexing (OFDM), providing a data transmission rate of at most 400 Mbps in 2.4GHz band and 867Mbps in 5GHz band. The WAP44IO employs industrial standard components with an IP67 class solid shell, that is waterproof, and dustproof, enabling the device to suit an adverse indoor environment.

The AP can be used as a stand alone AP, and will support up to 8 SSID’s.

It can also be used with our Amer Wireless controllers, which will allow it to support up to 32 SSID’s, and a multitude of advanced features.

The WAP44IO is a series of high-rate wireless APs preferred in various outdoor application environments for many purposes such as campus WLAN access, campus coverage, and operators hot spot coverage.

Additional information

Dimensions (mm)

214 x 214 x 67.5

Network Connection

2 x 10/100/1000 RJ-45 Port




Internal Antenna, 2.4 and 5Ghz @ 10dBi

IEEE Standards

802.11a/n, 802.11b/g/n, 802.11ac

Power adjustment

1 dBm

AP access speed

400 Mbps for 2.4 Ghz
867 Mbps for 5 Ghz
1.267 Mbps total

Working frequency band

2.4 GHz and 5 GHz

Virtual AP (BSSID)


Number of Spatial Streams


Working Temperature

-40°C to 80°C

Working Humidity

5% to 95% (non-condensing)

Operation Mode

Based on install mode (FAT) is stand alone mode, (FIT) is controller based

WLAN Function (FAT)

Dynamic channel adjustment, transmit power control, blind area detection and repair, SSID hiding, RTS/CTS. Hybrid access, restrict access based on number of users, airtime fairness, high-density application optimization.

Security (FAT)

64/128 WEP Encryption, dynamic WEP, TKIP and CCMP. 802.11i and WAPI support.

Forwarding (FAT)

Static IP address, DHCP support, local forwarding, WDS support.


WMM support, 802.1P priority mapping, QoS policy mapping, power saving mode.

Management (FAT)

local and remote, user statistics, remote probe analysis, switch AP mode, dual image support.

11n enhancements (Both)

40 MHz bundling, 300 Mbps (PHY), Frame aggregation (A-MPDU), Maximum likelihood demodulation(MLD), Transmit beam forming (TxBF), Low-density parity-check code (LDPC), Maximum ratio combining (MRC), Space-time block coding (STBC)

WLAN Function (FIT)

RF environment scanning, Link integrity check, Forced roaming of terminals with weak signals.

Security (FIT)

MAC address authentication, PEAP authentication, WIDS/WIPS, Real-time spectrum protection ,Protection against DoS attacks: Anti-DoS for wireless management packets, Forwarding security: Frame filtering, white list, static blacklist, and dynamic blacklist, User isolation: AP L2 forwarding suppression, Isolation between virtual APs (multiple SSIDs), Periodic SSID enabling and disabling, free resource control, wireless SAVI, ACL support, AP authentication control.

Forwarding (FIT)

IPv4 and IPv6 forwarding, Portal support, multicast, roaming across multiple controllers, AP switching reference,


L2 to L4 packet filtering, Load balancing, Bandwidth limitations, Emergency failover, terminal identification, multicast enhancement.

Management (FIT)

AP statistics, controller statistics, syslog logging, alarm support, fault detection, watchdog, mode control.


3 years


Free Tech support via phone or email

Supported Controllers

WS6002, WS6028, WS6222


 WAP44IO Spec Sheet