802.11abgn indoor wireless AP (2.4 GHz & 5 GHz dual-channel dual-frequency, external antenna, 802.3at PoE)


The WAP33DC is a series of new-generation 802.11n-based high-performance gigabit wireless access points (APs) for industrial users. It provides a wireless access rate equivalent to at least six times the rate available on a conventional 802.11a/b/g network, and offers wider coverage. The WAP33DC uses GE ports as its uplink ports for access, which break through the limitations of FE ports and enable wireless multimedia applications to come true.

While completely taking into consideration important factors, such as wireless network security, radio frequency (RF) control, mobile access, quality of service (QoS) guarantee, and seamless roaming, the WAP33DC can be used with the WS6002  to perform data forwarding, security, and access control of wireless users.

The WAP33DC operates in a 2.4 GHz or 5 GHz band and employs technologies such as multiple-input multiple-output (MIMO) and orthogonal frequency division multiplexing (OFDM), providing a data transmission rate of 300 Mbps per channel and 600 Mbps per dual channels.

The WAP33DC features flexible installation, and can be installed on the wall, desk top, or ceiling configuration. Its antenna are flexibly and can be changed according to customers’ application requirements. TheWAP33DC supports both local power supply and power over Ethernet (PoE), which may be selected by customers to adapt to their onsite power environments. The WAP33DC is a series of high-rate wireless APs preferred in various application environments for purposes such as such as campus WLAN access, campus coverage, and operators’ hot spot coverage. The WAP33DC is a powerfully stand alone access point, but when combined with the WS6002, it becomes a true enterprise level central management solution.

Additional information

Dimensions (mm)

209 x 125 x 25

Network Connection

1 x 10/100/1000 RJ-45 Port

Console port

1 x RJ-45 port

External Power

12 V DC, 2 Amp adapter




3 x 2.4/5 GHz 5 dBi omni cylindrical antennas

IEEE Standards

802.11a/n, 802.11b/g/n

Power adjustment

1 dBm

AP access speed

6 Mbps to 300 Mbps

Working frequency band

2.4 GHz and 5 GHz

Virtual AP (BSSID)


Number of Spatial Streams


Working Temperature

–10°C to 55°C

Working Humidity

5% to 95% (non-condensing)

Operation Mode

Based on install mode (FAT) is stand alone mode, (FIT) is controller based.

WLAN Function (FAT)

Dynamic channel adjustment, transmit power control, blind area detection and repair, SSID hiding, RTS/CTS. Hybrid access, restrict access based on number of users, airtime fairness, high-density application optimization.

Security (FAT)

64/128 WEP Encryption, dynamic WEP, TKIP and CCMP. 802.11i and WAPI support.

Forwarding (FAT)

Static IP address, DHCP support, local forwarding, WDS support.


WMM support, 802.1P priority mapping, QoS policy mapping, power saving mode.

Management (FAT)

local and remote, user statistics, remote probe analysis, switch AP mode, dual image support

11n enhancements (Both)

40 MHz bundling, 300 Mbps (PHY), Frame aggregation (A-MPDU), Maximum likelihood demodulation(MLD), Transmit beam forming (TxBF), Low-density parity-check code (LDPC), Maximum ratio combining (MRC), Space-time block coding (STBC)

WLAN Function (FIT)

RF environment scanning, Link integrity check, Forced roaming of terminals with weak signals

Security (FIT)

MAC address authentication, PEAP authentication, WIDS/WIPS, Real-time spectrum protection ,Protection against DoS attacks: Anti-DoS for wireless management packets, Forwarding security: Frame filtering, white list, static blacklist, and dynamic blacklist, User isolation: AP L2 forwarding suppression, Isolation between virtual APs (multiple SSIDs), Periodic SSID enabling and disabling, free resource control, wireless SAVI, ACL support, AP authentication control.

Forwarding (FIT)

IPv4 and IPv6 forwarding, Portal support, multicast, roaming across multiple controllers, AP switching reference,


L2 to L4 packet filtering, Load balancing, Bandwidth limitations, Emergency failover, terminal identification, multicast enhancement.

Management (FIT)

AP statistics, controller statistics, syslog logging, alarm support, fault detection, watchdog, mode control.


3 years


Free Tech support via phone or email

Supported Controllers

WS6002, WS6028, WS6222


WAP33DC Spec Sheet

WAP33DC Quick Installation Guide

WAP33DC Hardware Installation Guide

WAP33DC Fat Web Manual

WAP33DC Hardware Installation Guide

WAP33DC Fat Web Manual