SS3GR5028F R2

L3 Lite 24 SFP and 4 SFP+ Fiber Switch

Description

Gigabit L3 (Lite) aggregation switch – Amer Networks, 8x COMBO (10/100/1000Base-T RJ45 or 100/1000Base-X SFP) + 16x 100/1000Base-X SFP + 4x 1/10GBase-X SFP+, 0°C +50°C, Power Supply 230V AC + 48V DC

The SS3GR5028F(R2) wwitch is designed to work in telecommunications networks, ISPs, as well as in structural installations of 10Gb enterprise, CCTV, WiFi. The switch provides full support for multicast technology, full VLAN table support as well as advanced DHCP functions. Due to the high bandwidth and non-blocking matrix, it is perfectly suited for use in high-performance operator networks. Implemented security mechanisms allow for optimal management of users connected to the network. The full range of device management functions allows you to maintain full control over the system.

Additional information

Model

SS3GR5028F R2

Classification

Layer L3 Lite aggregation switch

Ports

8x 1Gb COMBO (RJ45/SFP) + 16x 100/1000Base-X SFP + 4x 1/10GBase-X SFP+

Managing ports

RJ45 – RS232 (CLI), RJ45 – 10/100Base-T Out of Band

Switching Capacity

128 Gb/s

Forwarding Rate

95 Mp/s

Packet buffer

1,5MB

Jumbo Frame

10k

MAC address Table

16k (shared for unicast and multicast (in 1:1 ratio))

Multicast MAC address Table

4k

ACL Table

1k rules, L2 ~ L4

Routing Table

1k shared for IPv4 and IPv6 (in 1:4 ratio)

Routing domains (IP interface

1024

CPU clock

800MHz

Flash memory

32MB + 128MB

RAM memory:

512MB

Resilience and availability

IEEE 802.1D (STP), IEEE 802.1w (RSTP), IEEE 802.1 s (MSTP), IEEE 802.3 ad LACP (max 128 group trunks with max 8 ports for each trunk), Virtual Cable Testing, DDM, LLDP, Loop Guard

Traffic control

IEEE 802.1Q (4094 VLAN's), Port-based VLAN, Protocol-based VLAN, IP subnet based VLAN, Voice VLAN, MAC VLAN, LACP Load Balance, GVRP, IEEE 802.1ad Vlan Stacking (QinQ), Flexible QinQ

Security

Layer 2 MAC filtering, BPDU Tunnel, Authentication and authorization of logins via Radius and Tacacs +, Tacacs+ accounting/auditing, SSH v1/v2, DHCP/DCHPv6 Snooping, IP/IPv6 Source Guard, Port Security

QoS

IEEE 802.1p Priority Queues per Port (8 Queues), IEEE 802.1p Quering method, Trusted COS/TOS/IP Precedence/DSCP/Port, Broadcast Storm Control, Rate Limiting, port based, Quering method – SP/DWRR/SDWRR

L2/L3 Multicast

Multicast VLAN, IGMP Query, IGMP Snooping (v1/v2/v3), IGMP Snooping Fast Leave (v2,v3), PIM-DM/SM/SSM, anycast RP, IPv6 MLD v1/v2 Snooping

Routing

RIP v1/v2, RIPng, OSPF v2/v3, IPv6 Static Route, BGP4+

Layer 3 IPv6

IPv4/IPv6 Dual Protocol Stack, IPv6 address, IPv6 Tunneling

Manageability

Console Port (CLI), Managment port RJ45, USB 2.0, GUI, telnet, SNMP, TFTP/FTP,Configuration backup and restore , Multilevel CLI, DHCP Client/Relay/Server, DHCP Relay per VLAN, DHCP Option 43/60/82, DHCPv6 Option 37/38, DHCPv6 Relay/Server, NTP, Port Mirroring per IP/TCP/UDP, RSPAN, OAM EFM/CFM

MIB

RFC 1066 TCP/IP‐based MIB, RFC1213, 1157 SNMPv2c/v3 MIB, RFC1493 bridge MIB, RFC 2674 bridge MIB extension, RFC1643 ethernet MIB, RFC1757 RMON group 1/2/3/9, RFC 2925 Remote Management MIB, RFC 2233 (rfc2233) ‐ SMIv2 MIB

Dimensions (Width x Height x Depth)

440mm x 44mm x 240mm

Operating Temperature

0°C +50°C

Power Supply

Built-in 230V AC + 48V DC RPS

Power Consumption

≤34W

Support

Free technical support (phone/email)

Reviews

There are no reviews yet.

Be the first to review “SS3GR5028F R2”

Your email address will not be published. Required fields are marked *