SS2GR4010P

L2 Gigabit Intelligent Ethernet PoE Switch with 8*10/100/1000Base-T and 2*100/1000Base-SFP ports, 100-240VAC Power Input. POE+ Supported

Description

SS2GR4000 Series is L2 Gigabits intelligent switch designed for carrier and MAN networks. It supports comprehensive QoS, enhanced VLAN functions (VLAN VPN, Voice VLAN, QinQ, N:1 VLAN Translation etc), Ethernet Ring Protection Protocol (G.8032), classified bandwidth control, intelligent security control, OAM(Operations, Administration and Maintenance), manageability functions and Triple-Play services which fulfil the network requirements demanded by carrier network, MAN access. Support for the Power Over Ethernet (PoE+) standard makes these devices ideal for use in CCTV networks, as well as installations of wireless WiFi networks. SS2GR4000 Series switch offers green features like IEEE 802.3az (Energy Efficient Ethernet), Fan-less design feature, which can dramatically lower power consumption, achieve green energy and save the cost for the carrier and MAN users.

Additional information

Model

SS2GR4010P(R2)

Ports

8x 10/100/1000Base-T RJ45 (PoE+) + 2 x 100/1000Base-X SFP

PoE

IEEE 802.3af (15,4W), 802.3at (30W)

PoE Power Budget

124 W

Management Ports

RJ45 – RS232 (CLI)

Switching Capacity

20 Gbps

Throughput

14.88 Mpps

Packet Buffer

0.5 MB

Jumbo Frames

10K

MAC Address Table

8k

Multicast MAC Table

500

ACL Table

1408 Rules, L2 ~ L4

VLAN (IP) Interfaces

16

Processor Clock

500MHz

FLASH Memory

32MB

RAM Memory

128MB

High Availability Features

IEEE 802.1D (STP), IEEE 802.1w (RSTP), IEEE 802.1s (MSTP), IEEE 802.3 ad LACP (8 groups per device / 8 ports per group), Virtual Cable Testing, DDM, LLDP, Loop guard

Traffic Control

IEEE 802.1Q (4094 VLAN\\'s), Port-based VLAN, Protocol-based VLAN, IP subnet based VLAN, Voice VLAN, MAC VLAN, LACP algorithm of IP address / MAC source / target (load balance), GVRP, IEEE 802.1 ad VLAN Stacking (QinQ), Selective QinQ

Security

Layer 2 MAC filtering, BPDU Tunnel, Authentication and authorization of logins through Radius and Tacacs +, Tacacs + accounting / auditing, SSH v1 / v2, DHCP / DCHPv6 Snooping, IP / IPv6 Source Guard, Port Security

QoS

IEEE 802.1p Priority Queues per Port (8 Queues), IEEE 802.1p Quering method, Trusted COS / TOS / IP Precedence / DSCP / Port, Broadcast Storm Control, Rate Limiting, port based, Quering method – SP / WRR / SP + WRR

L2 / L3 Multicast

Multicast VLAN, IGMP Query, IGMP Snooping (v1 / v2 / v3), IGMP Snooping Fast Leave (v2, v3), IPv6 MLD v1 / v2 Snooping

Layer 3 IPv6

IPv4 / IPv6 Dual Protocol Stack, IPv6 address

Management

Console port (CLI), GUI, telnet, SNMP, TFTP / FTP, Configuration backup and restore, Multi-level CLI, DHCP Client / Relay / Server, DHCP Relay per VLAN, DHCP Option 43/60/82, DHCPv6 Option 37/38, DHCPv6 Relay / Server, NTP, Port Mirroring over IP / TCP / UDP, RSPAN, OAM EFM / CFM

MIB

RFC 1066 TCP / IP-based MIB, RFC1213, 1157 SNMPv2c / v3 MIB, RFC1493 MIB bridge, RFC 2674 bridge MIB extension, RFC1643 MIB ethernet, RFC1757 RMON group 1/2/3/9, RFC 2925 Remote Management MIB, RFC 2233 (rfc2233) – SMIv2 MIB

Dimensions (WxHxD)

340mm x 43.6mm x 200mm

Working Temperature

0 ° C + 50 ° C

Power Supply

Built-in 1x 230V AC

Max Power Consumption

≤144 W

Downloads

SS2GR4000 Series Spec Sheet

SS2GR4000 Series CLI Guide

SS2GR4000 Series Installation Guide

Reviews

There are no reviews yet.

Be the first to review “SS2GR4010P”

Your email address will not be published. Required fields are marked *